Whether you’re starting a business or need a small footprint machine for your existing business that’s packed with mighty features, these wet and dry machines out perform others in their category. Perfect for parts as short as five inches and as wide as 24 inches, these machines get it right from the start. If you’re in the market for a workhorse family of worry-free products, plus a host of features that others call options, the Timesavers 2100 and 2200 Series is designed for you.
TimeSavers 2100 Finishing Machine Specifications
- 60″ abrasive belt length
- Disc brakes on main motor
- Mechanical readout
- Double infeed and outfeed holddown rolls
- Hour meter
- Motorized lift
- Four bed jacks
- Quick release outboard support
- Through-beam abrasive belt tracking
- Infeed stop bar
- 15-30 FPM feed speed A/C (reversing)
- Centralized lube hub on high speed bearings
- Air knife dryer
- Integrated coolant/filter system
- Stainless steel construction where needed
- Main motor load meter
- 0-5″ opening
- 15″ infeed loading area
- Transformer to 220V (option)
TimeSavers 2200 Finishing Machine Specifications
- Number of Heads: 1-3
- Head Types: Drum, Brush
- Machine Widths: 37”, 43”, 52”
- Up to 30 HP Main Drive Motor
- 75” or 103” Abrasive Belt Length
- Automatic Abrasive Belt Tracking
- 0-5” Bed Opening (33”-38” Passline)
- 25” Width: 15-45 FPM Feed Speed
- 6” or 8” Diameter Adjustable Contact Drums
- 8” Diameter Brush
TimeSavers 2200 Rotary Brush Finishing Machine Specifications
- Number of Heads: 1-2
- Head Types: Rotary Brush, Drum
- Machine Widths: 37”, 52”
- Abrasive Brush Size: 12”x39” or 12”x12”
- Number of Brushes: 2 or 8
- Quick Change Brush Mounting
- 0-4” Bed Opening (34”-38” Passline)
- 2-15 FPM Feed Speed
- 6” Diameter Adjustable Contact Drum
- Vacuum Conveyor Bed is Standard
TimeSavers Slag Grinder Specifications
- Number of Heads: 2-3
- Head Types: Drum, Soft Drum, Brush
- Machine Widths: 37”, 52”
- Up to 30 HP Main Drive Motor
- 60”, 75”, or 103” Abrasive Belt Length
- Automatic Abrasive Belt Tracking
- 0-5” Bed Opening (33”-38” Passline)
- 10-30 FPM Feed Speed
- 6” or 7” Diameter Adjustable Contact Drum (Hard Drum in 1st Position)
- 6”, 8”, or 11” Diameter Adjustable Contact Drum (Soft Drum in 2nd Position)
- 8” or 11” Diameter Wire Brush
